Checking Components And Wiring
Check the signal cable (carphone mute). Check between accessory control module terminal #B12 and the radio connector. Check for a short-circuit to ground.
Remedy as necessary.
Other information:
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX. ACCESSORY ELECTRONIC MODULE
- To access or replace the Accessory Electronic Module (AEM) and connector, see ACCESSORY ELECTRONIC MODULE (AEM), REPLACING
- For information about signals, see SIGNAL DESCRIPTION. ACCESSORY ELECTRONIC MODULE (AEM)
- To fault-trace wiring and terminals, see CHECKING WIRING AND TERMINALS
- Continue
Refer to VERIFICATION