Replacing The Component

Fig 1: Identifying Ignition OFF

GLL101045

Courtesy of VOLVO CARS CORPORATION

Switch off the ignition. Wait 10 seconds.
CAUTION:
Avoid touching the terminal pins in the occupant weight sensor (OWS). There is a risk of static discharge which could damage the occupant weight sensor (OWS).

Change pressure sensor and occupant weight sensor (OWS). Pressure sensor included in system occupant weight sensor (OWS).

NOTE:
After change of pressure sensor and occupant weight sensor (OWS) then the supplemental restraint system module (SRS) must be configured. This is done by storing ID-number for occupant weight sensor (OWS).

The occupant weight sensor (OWS) must also be calibrated.

Other information

Continue
See: VERIFICATION