Removing The Mechanism / Mechanical Cable

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 Volvo XC90, 2010 Volvo XC90, 2009 Volvo XC90, 2008 Volvo XC90, and 2007 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Angling Mechanism Up

GLL104895

Courtesy of VOLVO CARS CORPORATION

Angle the mechanism up.

Remove the screw.

Fig 2: Identifying Carriage And Slides

GLL104896

Courtesy of VOLVO CARS CORPORATION

Pull the carriage as far back as possible.

Remove the carriage from the slides.

Fig 3: Identifying Screw And Bracket

GLL104897

Courtesy of VOLVO CARS CORPORATION

Remove:

the screw
the bracket.

NOTE:

Note the position of the locating pin for the drive plate against the bracket.

Fig 4: Identifying Drive Plate

GLL104898

Courtesy of VOLVO CARS CORPORATION

NOTE:

Note the position of the locating pin for the drive plate against the mechanism.

Pull the drive plate as far back as possible.

Fig 5: Identifying Screws

GLL104899

Courtesy of VOLVO CARS CORPORATION

Remove the 2 screws.

Fig 6: Identifying Carriage And Mounting / Mechanical Cable

GLL104900

Courtesy of VOLVO CARS CORPORATION

Pull the carriage out.

Angle up and pull out the mounting / mechanical cable.

Fig 7: Identifying Mechanism

GLL104901

Courtesy of VOLVO CARS CORPORATION

Withdraw the mechanism.