LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2014 >> XC90 3.2, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Doors, Lids, Sunroof And Windows - Removal, Replacement And Installation) >> Sun Roof (2003-2011) >> Apron Molding Sun Roof, Replacement >> Removing The Apron Molding For The Sun Roof

Removing The Apron Molding For The Sun Roof

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 Volvo XC90, 2010 Volvo XC90, 2009 Volvo XC90, 2008 Volvo XC90, and 2007 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Apron Molding Pulled Into Car
GLL104860Courtesy of VOLVO CARS CORPORATION

The sun roof must be in the half open position.

Pull the apron molding inwards into the car.

Detach the upper edge of the apron molding.

Unhook the lower edge of the apron molding.

Remove the apron molding.

scientia non olet · About LEMON Manuals