Removing Rivet
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 Volvo XC90, 2010 Volvo XC90, 2009 Volvo XC90, 2008 Volvo XC90, and 2007 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
| Special tools | |
|---|---|
| T9814075 SPRAY GUN Tool number: T9814075 Tool description: SPRAY GUN Tool boards: |
|
| Materials: | |
|---|---|
| Designation | Part number |
| Thin rustproofing agent | 1161682 |
NOTE:
If the pop rivet spins, drill at a 45° angle against the pop rivet.
Pay attention to heat generation when drilling in pop rivet mounted in plastic part.
Remove drill burrs and any remains of the rivet.
If possible, put tape on the back to catch pop rivet.
To avoid rattling if it is not possible to remove remains of rivet.
Use: Thin rustproofing agent, 1161682
CAUTION:
Make sure that rustproofing agent does not run out, discoloring the upholstery or other.