Installing The Exterior Handle On The Upper Tailgate

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 Volvo XC90, 2010 Volvo XC90, 2009 Volvo XC90, 2008 Volvo XC90, and 2007 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For tightening torques, see TIGHTENING TORQUE .

Install:

the opening handle
4 M6 nuts. Tighten
the mechanical cable for the outer opening handle
the wiper motor
the connector for the wiper motor
the 3 M6 screws. Tighten
the panel. See PANEL TAILGATE UPPER, REPLACING
the wiper arm. See TAILGATE WIPER ARM / BLADE, REPLACING