Installing The Inner Handle In The Lower Tailgate

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 Volvo XC90, 2010 Volvo XC90, 2009 Volvo XC90, 2008 Volvo XC90, and 2007 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For tightening torques, see TIGHTENING TORQUE .

Install:

the cable from the bracket
the opening handle
the 2 M5 screws. Tighten
the cover
the opening handle and the cables in the tailgate
the 3 M8 screws. Tighten.

Press the cable into place in the clip.

Hook the cables in the lock.

Install the lock mechanism. See LOCK MECHANISM TAILGATE LOWER, REPLACING .