Installing The Lock Unit For The Fuel Tank Filler Cover
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 Volvo XC90, 2010 Volvo XC90, 2009 Volvo XC90, 2008 Volvo XC90, and 2007 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the two screws holding the lock unit on the bracket
- the two screws holding the bracket in the body
- the connector.
Reinstall the insulation.
Install:
- the hatch (the rear section of the side panel in the cargo compartment)
- the outer load floor.
Fold down the cargo floor hatch.