Checking The Input

• Handbrake on.

  Read status of lamp.

  When handbrake is on status should be "ON", and when handbrake is released status should be "OFF".

  Additional information: 

  • To connect the test box, see CONNECTING THE DRIVER INFORMATION MODULE (DIM) TEST BOX .
  Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Are the values correct? 

• YES 

  Refer to VERIFICATION 

• NO 

  Refer to CHECKING THE WIRE AND HANDBRAKE CONTACT