LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2014 >> S80 T6 >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake And Exhaust System - Cleaning, Inspection And Adjustment >> WASTEGATE Control Valve Adjustment >> WASTEGATE Control Valve Adjustment [2008-2010, B6304T2 | 2011-2015, B6304T4] >> Adjustment

WASTEGATE Control Valve Adjustment [2008-2010, B6304T2 | 2011-2015, B6304T4]: Adjustment

Remove the right drive shaft, refer to: DRIVE SHAFT RIGHT

GLL160003Courtesy of VOLVO CARS CORPORATION

Torque:  M10, 50Nm

GLL160004Courtesy of VOLVO CARS CORPORATION

Torque:  M10, 50Nm

NOTE:

Turn the adjusting screw counter-clockwise to increase stroke. Turn the adjusting screw clockwise to decrease stroke. 

NOTE:

One revolution corresponds to approx. 1 mm stroke. 

GLL167249Courtesy of VOLVO CARS CORPORATION
CAUTION:

Take extra care when handling the component. 

  1. Loosen the nut.
  2. Adjust to specified average value.

See information about wastegate valve, refer to: WASTEGATE VALVE

GLL167248Courtesy of VOLVO CARS CORPORATION
CAUTION:

Take extra care when handling the component. 

Torque:  Pressure regulator, lock nut adjuster rod, 7Nm

GLL161416Courtesy of VOLVO CARS CORPORATION
  1. Loosen the nut.
  2. Adjust to specified average value.

See information about wastegate valve, refer to: WASTEGATE VALVE

GLL167363Courtesy of VOLVO CARS CORPORATION

Torque:  Pressure regulator, lock nut adjuster rod, 7Nm

Repeat the method to verify that the average value is according to specifications.