WASTEGATE Control Valve Adjustment [2011-2016, B6304T4 | 2015-2016, B6304T5]

NOTE: For more information on Volvo color coded illustrations, refer to IMAGES

SPECIAL TOOLS

Courtesy of VOLVO CARS CORPORATION

951 2986 Measurement sensor (Part of 9512985)
Tool number: 951 2986
Tool description: Measurement sensor (Part of 9512985)
Tool boards: EU99

Materials
Designation	Part number
Universal oil	1161657

CHECK

Remove right front wheel. Refer to WHEELS

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Use: Universal oil, 1161657

Courtesy of VOLVO CARS CORPORATION

Refer to Special Tool: 951 2986

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Make sure that the component moves freely between the end positions.

Repeat the following steps until the component moves freely. Some minimal binding is permitted.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Adjust to the specified value.
Close the shutoff valve.
Remove the hose.
Check that the pressure-drop remains within the specified values.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Refer to table, using adjacent link.

CAUTION:

If the specified pressure is exceeded repeat the steps.

Refer to table, using adjacent link.

See information about wastegate valve. Refer to WASTEGATE VALVE

Courtesy of VOLVO CARS CORPORATION

Note the value.

Courtesy of VOLVO CARS CORPORATION

Refer to table, using adjacent link.
Refer to table, using adjacent link.

CAUTION:

If the specified pressure is exceeded repeat the steps.

See information about wastegate valve. Refer to WASTEGATE VALVE

Courtesy of VOLVO CARS CORPORATION

Note the value.

Calculate the average value.

Follow the instructions for wastegate valve. Refer to WASTEGATE VALVE

If the average value is not according to specifications, adjust the stroke.

ADJUSTMENT

Remove the right drive shaft. Refer to DRIVE SHAFT RIGHT

Courtesy of VOLVO CARS CORPORATION

Torque: M10, 50Nm

Courtesy of VOLVO CARS CORPORATION

Torque: M10, 50Nm

NOTE:

Turn the adjusting screw counter-clockwise to increase stroke. Turn the adjusting screw clockwise to decrease stroke.

NOTE:

One revolution corresponds to approx. 1 mm stroke.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Take extra care when handling the component.

Loosen the nut.
Adjust to specified average value.

See information about wastegate valve. Refer to WASTEGATE VALVE

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Take extra care when handling the component.

Torque: Pressure regulator, lock nut adjuster rod, 7Nm

Courtesy of VOLVO CARS CORPORATION

Loosen the nut.
Adjust to specified average value.

See information about wastegate valve. Refer to WASTEGATE VALVE

Courtesy of VOLVO CARS CORPORATION

Torque: Pressure regulator, lock nut adjuster rod, 7Nm

Repeat the method to verify that the average value is according to specifications.