Brake Disc Front, Checking [2014-2015, B4204T10, TG-81SC | 2014-2016, B4204T11; B4204T12; B4204T9, TG-81SC | 2016, B4204T9, TG-81SC AWD | 2014, B5254T12, TF-80SC | 2014-2016, B5254T12; B6304T4, TF-80SC AWD | 2015-2016, B6304T5, TF-80SC AWD]
NOTE:
For more information on Volvo color coded illustrations, refer to IMAGES
SPECIAL TOOLS
| 999 5418 Measuring kit(hub, brake disc and runout, b-vers) Tool number: 999 5418 Tool description: Measuring kit(hub, brake disc and runout, b-vers) Tool boards: 61 |
|
| 999 7104 Clamp ring Tool number: 999 7104 Tool description: Clamp ring Tool boards: 61 |
|
| 999 5420 Mounting Tool number: 999 5420 Tool description: Mounting Tool boards: 50 |
|
| 981 3134 DIAL INDICATOR Tool number: 981 3134 Tool description: DIAL INDICATOR Tool boards: |
EXTRA INFORMATION
The minimum permitted brake disc thickness is read on the brake disc.
CHECK
Remove brake calliper, front, refer to: FRONT BRAKE CALIPER
NOTE:
Make sure that the mating faces are clean and free of foreign material.
Torque: M14, 130Nm
Special Tool: 981 3134, Special Tool: 999 5420
Slowly rotate the brake disc and note the dial indicator gauge readings.
NOTE:
The following steps are only necessary when installing a new component.
Perform wheel hub front, checking, refer to: WHEEL HUB FRONT, CHECKING
Remove the front brake disc, refer to: FRONT BRAKE DISC
INSTALLATION
Install brake caliper front, refer to: FRONT BRAKE CALIPER