Brake Disc Rear, Checking [2011-2018]

NOTE: For more information on Volvo color coded illustrations, refer to IMAGES

SPECIAL TOOLS

Courtesy of VOLVO CARS CORPORATION	999 5418 Measuring kit(hub, brake disc and runout, b-vers) Tool number: 999 5418 Tool description: Measuring kit(hub, brake disc and runout, b-vers) Tool boards: 61
Courtesy of VOLVO CARS CORPORATION	999 7104 Clamp ring Tool number: 999 7104 Tool description: Clamp ring Tool boards: 61
Courtesy of VOLVO CARS CORPORATION	999 5420 Mounting Tool number: 999 5420 Tool description: Mounting Tool boards: 50
Courtesy of VOLVO CARS CORPORATION	981 3134 DIAL INDICATOR Tool number: 981 3134 Tool description: DIAL INDICATOR Tool boards:

EXTRA INFORMATION

GLL1023500

Courtesy of VOLVO CARS CORPORATION

The minimum permitted brake disc thickness is read on the brake disc.

CHECK

GLL172597

Courtesy of VOLVO CARS CORPORATION

Special Tool: 999 5418

Remove the wheel, refer to: WHEELS

Remove brake caliper rear, refer to: REAR BRAKE CALIPER

GLL172299

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Special Tool: 999 7104

Torque: Wheel to wheel hub

Stage 1: 20Nm
Stage 2: 140Nm

GLL172784

Courtesy of VOLVO CARS CORPORATION

Special Tool: 999 5420

GLL172753

Courtesy of VOLVO CARS CORPORATION

Slowly rotate the brake disc and note the dial indicator gauge readings.

Special Tool: 999 5420, Special Tool: 981 3134

NOTE:

The following steps are only necessary when installing a new component.

Remove brake disc rear, refer to: REAR BRAKE DISC

Perform wheel hub rear, checking, refer to: WHEEL HUB REAR, CHECKING