Install The Brake Hose

NOTE:

For tightening torques, see: TIGHTENING TORQUE .

Fig 1: Identifying Brake Hose, Bracket And Brake Pipe

GLL104472

Courtesy of VOLVO CARS CORPORATION

Install:

the brake hose (1) to the caliper. Tighten. See: TIGHTENING TORQUE
the brake pipe (2) in the hose. Tighten. See: TIGHTENING TORQUE . Check that the hose is not twisted
the bracket (3).

Top up and bleed the braking system. See: BRAKE SYSTEM, BLEEDING (USING BLEEDING UNIT) .

Install the wheel. See: INSTALLING WHEELS .