Master Cylinder, Brake [2011, 2017 | 2014-2015, B4204T10; B4204T11; B4204T12; B4204T9; B6304T4; B6324S4; B6324S5, TG-81SC; TF-80SC AWD | 2015-2016, B5254T12, TF-80SC AWD | 2016, B5254T12, TF-80SD AWD | 2009-2010, B6304T2 | 2010, B6324S; B6324S2 | 2012-2013, B6324S4; B6324S5; B6304T4]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
See information about safety information brake system, refer to: SAFETY INFORMATION BRAKE SYSTEM
Remove the following items:
- Battery, refer to: BATTERY
- Reservoir, brake fluid. Refer to: RESERVOIR, BRAKE FLUID
- Plenum cover, refer to: PLENUM COVER
Torque: M6, 10Nm
CAUTION:
Make sure that all openings are sealed.
NOTE:
Make sure that the seal is correctly located.
- Torque: Ø8 mm diameter brake line, 18Nm
- Torque: Ø8 mm diameter brake line, 18Nm
- Torque: M8, 24Nm