Master Cylinder, Brake [2011, 2012, 2017, 2018 | 2014-2015, B4204T10, TG-81SC | 2014-2016, B4204T11; B4204T12; B4204T9; B5254T12; B6304T4, TG-81SC; TF-80SC AWD | 2016, B4204T9, TG-81SC AWD | 2013, B5254T12 | 2014, B5254T12, TF-80SC | 2012, B5254T5 | 2012-2013, B6304T4 | 2015-2016, B6304T5, TF-80SC AWD]: Removal
NOTE:
Removal steps in this procedure may contain installation details.
See information about safety information brake system, refer to:SAFETY INFORMATION BRAKE SYSTEM
Remove the following items:
- battery, refer to: BATTERY
- Reservoir, brake fluid, refer to: RESERVOIR, BRAKE FLUID
- plenum cover, refer to: PLENUM COVER
Torque: M6, 10Nm
CAUTION:
Make sure that all openings are sealed.
NOTE:
Make sure that the seal is correctly located.
- Torque: Ø8 mm diameter brake line, 18Nm
- Torque: Ø8 mm diameter brake line, 18Nm
- Torque: M8, 24Nm