Brake Booster Vacuum Pump, Reconditioning [2014-2016, B6304T4 | 2015-2016, B6304T5]
| Materials | |
|---|---|
| Designation | Part number |
| Engine oil | |
REMOVAL
Removal steps in this procedure may contain installation details.
Take extra care when handling the component.
Extreme cleanliness must be exercised when handling these components.
Make sure that the area around the component is clean and free of foreign material.
Be prepared to collect escaping fluid.
Do not loosen the bolts more than one turn.
Be prepared to collect escaping fluid.
Use lint free cloth.
Use lint free cloth.
Make sure that the seal is correctly located.
Make sure that the seal is correctly located.
Make sure that a new component is installed.
Make sure that the component is positioned correctly.
Make sure that a new component is installed.
Make sure to turn the component until stop.
Do not fully tighten the bolts.
Make sure that the seal is correctly located.
Make sure that a new component is installed.
Make sure that the component is positioned correctly.
Make sure that a new component is installed.
Use: Engine oil,
A click confirms that the component is in the correct position.
Torque: M7, 17Nm
Torque: Cap to Brake Booster Vacuum Pump, 7Nm
INSTALLATION
To install, reverse the removal procedure.