LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2013 >> C30 T-5 R-Design, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation >> Vacuum Pump, Tank, Line And Valve >> Brake Booster Vacuum Hose >> Removal >> Removing The Master Cylinder

Removing The Master Cylinder

Fig 1: Identifying Brake Master Cylinder Fasteners
GLL140026Courtesy of VOLVO CARS CORPORATION

Remove the 2 nuts. Pull the master cylinder out from the studs. Allow the master cylinder to hang from the brake pipes.

NOTE: Do not damage the brake pipes when removing the master cylinder.
scientia non olet · About LEMON Manuals