Checking The Ground Lead
- Ignition off
- Disconnect connector from the seat heater module.
Check the cable between seat heater (9/12) for left seat and (9/13) for right seat connector terminal #5 and ground terminal 31/66 or 31/67. Check for an open-circuit.
Remedy as necessary.
Other information:
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX
- For information about signals, see SIGNAL SPECIFICATION
- see CHECKING WIRING AND TERMINALS .
Is the cable OK?
- YES
Refer to CHECKING THE POWER SUPPLY
- NO
OKAY: Troubleshooting has been completed.