LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2012 >> XC90 R-Design, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation >> Master Cylinder, Brake Booster (2003-2014) >> Master Cylinder, Replacing >> Removal >> Removing The Brake Pipe

Removing The Brake Pipe

Fig 1: Brake Pipe
GLL104478Courtesy of VOLVO CARS CORPORATION

Remove: 

Plug the holes on the ABS hydraulic modulator so that that contaminants cannot get into it.