LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2012 >> XC90 R-Design, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation >> Brake Pipes And Connections (2003-2014) >> Brake Pipe Rear Wheel, Replacing >> Installation >> Testing The Pressure Of The Brake System

Testing The Pressure Of The Brake System

Fig 1: Depressing Brake Pedal As If Braking Suddenly (So That Wheels Would Almost Lock) For 30 Seconds
GLL104586Courtesy of VOLVO CARS CORPORATION

Depress the brake pedal hard for 30 seconds.

Check that no leakage occurs from the brake nipples, hoses and joints.

Remedy any leakage.

Install the wheel. See INSTALLING WHEELS .