LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2012 >> XC90 R-Design, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Electrical Accessories And Switches - Removal, Replacement And Installation >> Electrical Components (2003) >> Keypad Steering Wheel, Replacing >> Removing The Keypad

Removing The Keypad

Fig 1: Identifying Keypad Steering Wheel Assembly
GLL106714Courtesy of VOLVO CARS CORPORATION

Remove the driver's airbag module. See AIRBAG DRIVER'S SIDE (SRS), REPLACING .

Remove screw (1).

Disconnect the ground lead.

Disconnect the green connector (2).

Remove the three screws (3). Remove the plastic bracket.

Fig 2: Identifying Keypad Connectors
GLL106374Courtesy of VOLVO CARS CORPORATION

Disconnect the connectors (1) for the keypad. Press the catches in.

Fig 3: Identifying Left Steering Wheel Keypad
GLL106349Courtesy of VOLVO CARS CORPORATION

Remove the screw (1) from keypad.

Press in the catch (2) and pull the keypad from the socket.

Fig 4: Identifying Right Steering Wheel Keypad
GLL106347Courtesy of VOLVO CARS CORPORATION

Remove the screw (1) from keypad.

Press in the catch (2) and pull the keypad from the socket.