Removing The Brake Pipe Junction / Abs Unit

Fig 1: Front-Rear Brake Pipe

Courtesy of VOLVO CARS CORPORATION

Clean around the brake pipe on the ABS hydraulic modulator. Remove the brake pipe from the ABS hydraulic modulator and holder.

Fig 2: Brake Pipe Removal Procedure

Courtesy of VOLVO CARS CORPORATION

Straighten the brake pipe by the ABS hydraulic modulator.

Raise the car.

Remove: 

• the left front wheel
• the screw for the bracket for the brake pipe and brake hose
• the holder from the brake pipes.

Clean the brake pipe and joint nipple.

Separate the brake pipe at the joint nipple.

Remove the brake pipe from its clips.