WASTEGATE Control Valve Adjustment: Adjustment

Remove the right drive shaft, see DRIVE SHAFT RIGHT

Fig 1: Identifying Bracket Bolts

Courtesy of VOLVO CARS CORPORATION

Torque: M10

50 Nm

Fig 2: Identifying Bracket Bolt

Courtesy of VOLVO CARS CORPORATION

Torque: M10

50 Nm

NOTE: Turn the adjusting screw counter-clockwise to increase stroke. Turn the adjusting screw clockwise to decrease stroke.

NOTE: One revolution corresponds to approx. 1 mm stroke.

Fig 3: Identifying Wastegate Adjustments

Courtesy of VOLVO CARS CORPORATION

CAUTION: Take extra care when handling the component.

See information about wastegate valve, see WASTEGATE VALVE

Fig 4: Locating Lock Nut

Courtesy of VOLVO CARS CORPORATION

CAUTION: Take extra care when handling the component.

Torque: Pressure regulator, lock nut adjuster rod

7 Nm

Fig 5: Identifying Pressure Regulator Lock Nut And Adjusting Rod

Courtesy of VOLVO CARS CORPORATION

See information about wastegate valve, see WASTEGATE VALVE

Fig 6: Identifying Pressure Regulator Lock Nut

Courtesy of VOLVO CARS CORPORATION

Torque: Pressure regulator, lock nut adjuster rod

7 Nm

Repeat the method to verify that the average value is according to specifications.