Checking The Diagnostic Trouble Codes (DTCS)

• Read off the diagnostic trouble codes (DTCs) by clicking on the VCT2000 (Volvo Scan Tool) symbol.
• Any diagnostic trouble codes (DTCs) stored for the Steering column lock module (SCL) should be fault traced first.

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

• Read off the diagnostic trouble codes (DTCs) by clicking on the VCT2000 (Volvo Scan Tool) symbol.
• First prioritize the DTCs that affect the ignition lock and then those that affect the CAN network.
• Fault-trace according to any DTCs in the Driver information module (DIM) and Central electronic module (CEM).
• Then fault-trace according to DTCs in the Engine control module (ECM) and Brake control module (BCM) related to vehicle speed, engine speed or similar.
• Fault-trace according to diagnostic trouble code (DTC) instructions.

Other information: 

• see GENERAL INFORMATION ABOUT FAULT-TRACING IN THE CAN NETWORK

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Are relevant diagnostics trouble codes (DTCs) stored? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to CHECK THE STEERING COLUMN LOCK