End Pipes, Double, Integrated [2014-2018]: Introduction

INFORMATION:

Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available before starting installation.
Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

COLOR SYMBOLS:

Courtesy of VOLVO CARS CORPORATION

NOTE:

This color chart displays (in color print and electronic version) the importance of the different colors used in the images of the method steps.

Used for focused component, the component with which you will do something.
Used as extra colors when you need to show or differentiate additional parts.
Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.
Used when the component is not fully removed from the vehicle but only hung to the side.
Used for standard tools and special tools.
Used as background color for vehicle components.

REMOVAL:

APPLIES TO THE S60 / V60 MODELS:

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Repeat on the other side.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

APPLIES TO V60 MODELS:

Courtesy of VOLVO CARS CORPORATION

ALL VEHICLES:

Courtesy of VOLVO CARS CORPORATION

Request the aid of a colleague for this procedure.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Place the Bumper Cover on a suitable surface.

Disconnect the connector, if applicable.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Locate relevant marking.

Courtesy of VOLVO CARS CORPORATION

Use: Pipe cutter

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Request the aid of a colleague for this procedure.

ACCESSORY INSTALLATION:

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Request the aid of a colleague for this procedure.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

WARNING:

Make sure that there are no leaks.

NOTE:

Ensure that the exhaust clamp cannot come into contact with surrounding parts during operation.

Courtesy of VOLVO CARS CORPORATION

NOTE:

The Diffuser (accessory) must be installed on the vehicle.

Place the Bumper Cover in position for installation.

Connect the connector.

Courtesy of VOLVO CARS CORPORATION

Reinstall the removed parts in reverse order.

REMOVAL:

APPLIES TO XC60 MODELS:

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Courtesy of VOLVO CARS CORPORATION

Remove the screws.

Repeat on the other side.

Courtesy of VOLVO CARS CORPORATION

NOTE:

This step is easier with two people.

Courtesy of VOLVO CARS CORPORATION

CAUTION:

Place the Bumper Cover on a suitable surface.

NOTE:

This step is easier with two people.

Disconnect the connector.

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Use: Pipe cutter

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Request the aid of a colleague for this procedure.

ACCESSORY INSTALLATION:

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

Courtesy of VOLVO CARS CORPORATION

WARNING:

Make sure that there are no leaks.

NOTE:

Ensure that the exhaust clamp cannot come into contact with surrounding parts during operation.

Courtesy of VOLVO CARS CORPORATION

NOTE:

The Diffuser (accessory) must be installed on the vehicle.

Courtesy of VOLVO CARS CORPORATION

Reinstall the removed parts in reverse order.

INFORMATION:

Read through all of the instructions before starting installation.
Notifications and warning texts are for your safety and to minimize the risk of something breaking during installation.
Ensure that all tools stated in the instructions are available before starting installation.
Certain steps in the instructions are only presented in the form of images. Explanatory text is also given for more complicated steps.
In the event of any problems with the instructions or the accessory, contact your local Volvo dealer.

COLOR SYMBOLS:

Courtesy of VOLVO CARS CORPORATION

NOTE:

This color chart displays (in color print and electronic version) the importance of the different colors used in the images of the method steps.

Used for focused component, the component with which you will do something.
Used as extra colors when you need to show or differentiate additional parts.
Used for attachments that are to be removed/installed. May be screws, clips, connectors, etc.
Used when the component is not fully removed from the vehicle but only hung to the side.
Used for standard tools and special tools.
Used as background color for vehicle components.

REMOVAL:

APPLIES TO VEHICLES WITH SINGLE END PIPE:

Courtesy of VOLVO CARS CORPORATION