Activating Lamps

Fig 1: Identifying Ignition ON

GLL101051

Courtesy of VOLVO CARS CORPORATION

Ignition on
Activate the system test procedures and check whether the relevant needle or lamp operates correctly. All indicators sweep once from min. to max. and back again. All lamps apart from the malfunction indicator lamp flash at 1 Hz.
The light level in the driver information module (DIM) is also checked.

All segments in the driver information module (DIM) flash.

Remedy as necessary

Other information
- see COMBINED INSTRUMENT PANEL
Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS CORPORATION