Applies To All Vehicles

Fig 1: View Of Front Bumper Cover Upper Mounting Screws

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Fender Liner Screws

Courtesy of VOLVO CARS CORPORATION

• Carry out on both sides.

Fig 3: Prying Between Headlamp Bumper Cover

Courtesy of VOLVO CARS CORPORATION

• Take a weatherstrip tool and pry between the headlamp bumper cover.
• Pull straight out until the catches release.
• Repeat the operation on the other side.

Fig 4: Removing Front Bumper Cover

Courtesy of VOLVO CARS CORPORATION

HINT: Removal of the bumper is facilitated if carried out by 2 people. 

Fig 1: View Of Routed Cable Harness

Courtesy of VOLVO CARS CORPORATION

• Route the cable harness further back and under the seat support and backwards and into the cargo compartment, along the existing cable harnesses.
• Position the cable harness so that it does not get trapped or damaged.