Induction Pipe (Non-Turbo): Removal

NOTE:

Removal steps in this procedure may contain installation details.

Fig 1: Identifying Cover Removal

Courtesy of VOLVO CARS CORPORATION

Fig 2: Locating Engine Undercover And Clips

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Connection Clamp And Housing Bolts

Courtesy of VOLVO CARS CORPORATION

Fig 4: Air Duct Connections

Courtesy of VOLVO CARS CORPORATION

Torque: M6

10 Nm

Fig 5: Identifying Intake Connecting Components

Courtesy of VOLVO CARS CORPORATION

Fig 6: Identifying Fasteners

Courtesy of VOLVO CARS CORPORATION

Torque: M7

17 Nm

Fig 7: Removing Throttle Body

Courtesy of VOLVO CARS CORPORATION