Brake Booster (B6304T2; 2008-09, B6324S, B8444S; 2007-09): Removal

NOTE: Removal steps in this procedure may contain installation details.

Fig 1: Remove/Install Brake Master Cylinder (Under Dash)

Courtesy of VOLVO CARS CORPORATION

Torque: M8

24 Nm

Remove the wiper mechanism, windscreen. See WIPER MECHANISM, WINDSHIELD

Fig 2: Remove/Install Fasteners

Courtesy of VOLVO CARS CORPORATION

Torque: M6

10 Nm

Fig 3: Identifying Brake Booster Connections

Courtesy of VOLVO CARS CORPORATION

CAUTION: Make sure that the brake booster push rod is correctly located.