Master Cylinder, Brake (B6304T2; 2008-09, B6324S, B8444S; 2007-09): Removal

NOTE: Removal steps in this procedure may contain installation details.

See information about safety information brake system. See SAFETY INFORMATION BRAKE SYSTEM

Remove the following items:

Fig 1: Identifying Battery Box Bolts

Courtesy of VOLVO CARS CORPORATION

Torque: M6

10 Nm

Fig 2: Remove/Install Lines, Nuts

Courtesy of VOLVO CARS CORPORATION

CAUTION: Make sure that all openings are sealed. Use new blanking caps.

NOTE: Make sure that the seal is correctly located.