Brake Disc Front, Checking [2011, 2012, 2017, 2018 | 2013, B5254T12, TF-80SC | 2013, B5254T12; B6304T4, TF-80SC AWD]

NOTE: For more information on Volvo color coded illustrations, refer to IMAGES

SPECIAL TOOLS

Courtesy of VOLVO CARS CORPORATION	999 5418 Measuring kit(hub, brake disc and runout, b-vers) Tool number: 999 5418 Tool description: Measuring kit(hub, brake disc and runout, b-vers) Tool boards: 61
Courtesy of VOLVO CARS CORPORATION	999 7104 Clamp ring Tool number: 999 7104 Tool description: Clamp ring Tool boards: 61
Courtesy of VOLVO CARS CORPORATION	999 5420 Mounting Tool number: 999 5420 Tool description: Mounting Tool boards: 50
Courtesy of VOLVO CARS CORPORATION	981 3134 DIAL INDICATOR Tool number: 981 3134 Tool description: DIAL INDICATOR Tool boards:

EXTRA INFORMATION

GLL1023500

Courtesy of VOLVO CARS CORPORATION

The minimum permitted brake disc thickness is read on the brake disc.

CHECK

GLL172597

Courtesy of VOLVO CARS CORPORATION

Special Tool: 999 5418

Remove brake calliper, front, refer to: FRONT BRAKE CALIPER

GLL172299

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Special Tool: 999 7104

Torque: M14, 130Nm

GLL172639

Courtesy of VOLVO CARS CORPORATION

Special Tool: 999 5420

GLL172644

Courtesy of VOLVO CARS CORPORATION

Slowly rotate the brake disc and note the dial indicator gauge readings.

Special Tool: 981 3134, Special Tool: 999 5420

NOTE:

The following steps are only necessary when installing a new component.

Perform wheel hub front, checking, refer to: WHEEL HUB FRONT, CHECKING

Remove the front brake disc, refer to: FRONT BRAKE DISC

INSTALLATION

Install brake caliper front, refer to: FRONT BRAKE CALIPER

NOTE:

This step is only necessary when installing a new component.

Install brake disc front, refer to: FRONT BRAKE DISC