Installing the relief valve

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Install

the brake pipes, hand-tighten. Check that no dirt can penetrate the brake system.
the mounting bolt relief valve. Tighten to 25 Nm.

Install the brake pipes in the correct position. Torque: 14 Nm.

Left-hand drive cars: Install the preheating hose.