LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2011 >> S40 T-5 >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation (644 Body)) >> Replacing Components (2000) >> Master Cylinder (RHD), Replacement >> Removing Master Cylinder

Removing Master Cylinder

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Remove the two mounting nuts. Pull the master cylinder and reservoir out of the power brake booster.

Remove the remaining brake fluid and the "O" ring.

Remove brake fluid reservoir, see Removing Brake Fluid Reservoir .

Installing the brake fluid reservoir, see Installing the Brake Fluid Reservoir .

scientia non olet · About LEMON Manuals