Removing Master Cylinder

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Master Cylinder/Power Brake Booster

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove

the two brake pipes from the master cylinder, seal them off.
the bolt from the reducing valve.
the fastening on the power brake booster.
the reduction valve support.
the entire master cylinder.