Checking the brake system after replacement
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove the bleeding system.
Check if there is any remaining air in the system by depressing the brake pedal with the same force as when braking normally.
The pedal must not move downwards more than 40 mm when the engine is switched off, and after the brake pedal is depressed 3-4 times. Bleed again if the pedal's movement exceeds 40 mm.
Check the brake system. Check for leaks.
Check the brake fluid level.
Wipe up any spilled brake fluid.