Inspecting Brake System After Bleeding
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove the bleed system.
Check whether there is still air in the system by depressing the brake pedal with a force equivalent to normal braking.
The pedal stroke should not exceed 40 mm with the engine turned off and after the brake pedal has been depressed 3-4 times. Bleed again if the pedal stroke exceeds 40 mm.
Check the brake system for leakage.
Check the brake fluid level.
Clean up the spilled brake fluid.