LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2011 >> S40 T-5 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Adhesive And Surface Treatment Material - General Information (544 Body) >> Surface Treatment Material >> RAPGARD-F Paintwork Protection >> Removal Of RAPGARD-F >> Bubbling

Removal Of RAPGARD-F: Bubbling

Inspect paintwork for bubbling after any adhesive residue has been removed. Bubbling is usually temporary and will disappear within 24 hours  . If there is still bubbling after 48 hours  , heat carefully using a hot-air gun. Hold the air pistol approximately 30 cm  from the paint.

NOTE:

the temperature of paintwork must not exceed 100 °C

If the bubbling persists, the paintwork must be sanded down and touched up.

scientia non olet · About LEMON Manuals