Remove And Install

Fig 1: Identifying Ignition In OFF Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: View Of Data Link Connector (OBD-II) location

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Data Link Connector (OBD-II) Release Tab

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Sliding Clip Back

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 5: Inserting Terminal Removal Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Only work on 1 cable at a time.

Fig 6: Pressing Tab And Removing Wire

Courtesy of VOLVO CARS OF NORTH AMERICA.