Installing The Remote Control Holder
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Clean the rear side of the holder for the remote control using isopropanol. Wipe dry.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Clean the front of the bracket using isopropanol. Wipe dry.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Take double-sided adhesive tape from the kit and remove one piece of protective backing tape.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Firmly press the tape in on the rear side of the holder.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Remove the remaining protective backing tape from the double-sided adhesive tape.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Firmly press the holder in on the bracket.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Secure the remote control from the kit into the holder.