Installing The Screen

Fig 1: Identifying Connectors And Pre-Routed DIN Cable

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect the pre-routed blue connector (1) and the pre-routed DIN cable (2) (in the cut-out in the dashboard) to the screen from the kit.
NOTE:
Route the cable with the green connector (3) so that it comes out in front of the screen.

Fig 2: Identifying Screen And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Pressing Panel Into Place

Courtesy of VOLVO CARS OF NORTH AMERICA.