Installing The Protective Covers

Fig 1: Removing/Installing Protective Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the protective cover for the firewall
• the plastic nut, x 1.

Fig 2: Removing/Installing Protective Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the protective cover over the brake fluid reservoir. Carefully lift up the cowl. Install the 2 clips for the protective cover.

Fig 3: Identifying Cowl Fasteners

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the 3 clips holding the cowl.