Removing The Master Cylinder

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Brake Master Cylinder Fasteners

Courtesy of VOLVO CARS CORPORATION

Remove the 2 nuts. Pull the master cylinder out from the studs. Allow the master cylinder to hang from the brake pipes.

NOTE: Do not damage the brake pipes when removing the master cylinder.