LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2011 >> C30 T-5, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Hydraulic-Vacuum-Hydraulic Brakes - Removal And Installation) >> Master Cylinder, Brake Servo >> Reservoir, Brake Fluid >> Removal

Reservoir, Brake Fluid: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
Fig 1: Locating Brake Master Cylinder Reservoir
GLL176348Courtesy of VOLVO CARS CORPORATION

Remove master cylinder brake. See MASTER CYLINDER, BRAKE 

Fig 2: Identifying Brake Master Cylinder Reservoir Retaining Bolt
GLL176347Courtesy of VOLVO CARS CORPORATION

Torque:  Brake fluid reservoir in master cylinder

3.5 Nm

Fig 3: Identifying Mating Surfaces
GLL176349Courtesy of VOLVO CARS CORPORATION
CAUTION: Make sure that the mating faces are clean and free of foreign material.