Removing The Master Cylinder
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Clean the brake tube terminals at the master cylinder and anti-lock brake system unit. Place paper under the master cylinder. This is to protect the paintwork from damage if brake fluid is spilled.
Remove:
- the connector on the brake fluid reservoir
- the 2 nuts
- the 2 brake pipes from the master cylinder. Install the sealing plugs
- the feeder hose for the clutch cylinder. Install the sealing plugs
- the master cylinder.