LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2011 >> C30 T-5, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Hydraulic-Vacuum-Hydraulic Brakes - Removal And Installation) >> Master Cylinder, Brake Servo >> Brake Booster >> Removal >> Removing The Power Brake Booster

Removing The Power Brake Booster

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Brake Booster Push Rod
GLL140029Courtesy of VOLVO CARS CORPORATION

Remove the pin for the power brake booster.

NOTE: The pin cannot be entirely removed. It must be replaced with a new pin on installation.
Fig 2: 4 Nuts Holding Power Brake Booster
GLL140030Courtesy of VOLVO CARS CORPORATION

Remove: