Removing The Pedal Sensor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pedal Sensor Connector

Courtesy of VOLVO CARS CORPORATION

Remove:

the pressure sensor (1)
the connector (2).

Fig 2: Identifying Pedal Sensor

Courtesy of VOLVO CARS CORPORATION

Remove the pedal sensor. Widen the snap ring and pull out the pedal sensor.

HINT: The opening on the snap ring points straight down. The snap ring does not need to be completely removed, just opened.

NOTE: Ensure that the O-ring is also removed.