Installing The Pedal Sensor
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Press in the new pedal sensor.
NOTE:
Use a new O-ring. The pedal sensor can only be installed in one position, i. e. with the locating pin pointing straight up.
Lubricate with soap solution and install the pressure sensor (1).
Connect the electrical connector (2).