Removing The Brake Pipe

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Protective Cover

Courtesy of VOLVO CARS CORPORATION

Remove the nut for the lower protective cover for the firewall.

NOTE: Clean the brake pipe terminals. Place paper under the hydraulic modulator to avoid brake fluid spillage.

Remove the brake pipe from the ABS unit. Install the plug.

Fig 2: Identifying Brake Hose/Pipe And Clip

Courtesy of VOLVO CARS CORPORATION

Remove:

the brake pipe from the brake hose
the brake pipe from the clips.