Removing The Brake Pipe

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Lines ABS Unit/Pipe Coupling Rear

Courtesy of VOLVO CARS CORPORATION

NOTE: Clean the brake pipe terminals. Place paper under the hydraulic modulator to avoid brake fluid spillage.

Remove:

the two brake pipes (1). See BRAKE LINES ABS UNIT/PIPE COUPLING REAR, REPLACING
the 3 nuts (2)
the lower protective cover for the firewall.

Fig 2: Brake Pipe

Courtesy of VOLVO CARS CORPORATION

Remove:

the brake pipe (3) from the ABS unit. Install the plug
the brake pipe (4)
the brake pipe from the clips.